Phòng mổ TL – PM 08

Phòng mổ TL - PM 08

Phòng mổ TL – PM 08

Xuất Xứ
Hà nội, Việt Nam
Tên sản phẩm
Phòng mổ
Số Model
Số lượng đặt hàng tối thiểu
1 Set/Sets
Quy cách đóng gói
Pallet gỗ, Containers
Thời gian giao hàng
15 ngày
Điều khoản thanh toán
L/C, T/T
Khả năng cung cấp
100 Set/Sets Tháng


Thông tin chi tiết sản phẩm Phòng mổ TL – PM 08


● France Air commits the airtightness of the system by placing a plenum and filters.

● Very simple and reliable filter tightening system.

● Diffusion grille generating, on the whole surface to protect, a unidirectional flow as described in the Norm NFS 90-351.

● Possibility of decenter scialytic.

8 range

● 7 standard dimensions: corresponding to the protection sizes requested by all the surgical deeds.

● Supply air flow from 2350 to 12400 m3/h.

● Standard height : 450 mm.

● Filtration V.H.E: H14 or U15 in standardised heights (thickness 68 mm).

● BVX 3: ceiling 100% filtering, with identical design, but withour airtight passage for sciatic arm (see p. 911).

● CYCLOPE: Biovax® 3 equipped with air recycling unit

(see p. 913).

8 application

● The filtering ceiling with unidirectional flow enables the obtaining in the risk zone, of the class ISO 5 according to the norm EN ISO 14644-1 at the required air renewable rate (risk 4 according to NFS 90 351).

8 construction/ composition

● Plenum:

– Stainless steel sheet (10/10rd) with white epoxy paint RAL 9010.

– Pressure tap (diam. 3 mm) on one of the vertical sides.

– Return of 25 mm at inferior part for fitting of fafse-seiling.

– Angle bracket supplied with fixing holes (diam. 10 mm every 60 cm) at superior part for fixing of the slab.

– Lateral air inlet made of a rigid sleeve (height 200 mm – depth: 150mm).

Phòng mổ TL - PM 08

● Support frames for filters:

– Stainless steel sheet (15/10th) with white epoxy pain RAL 9010.

– Forming at low part of the plenum a self-supporting frame on which the filters are assembled.

– Gasket surface perfectly airtight and flat, withour possibility of leaks in angles.

– Assembly of frames between themselves and frame/plenum assembly done at factory.

– Contains 6 tightening points for the filters. The filters

tightening is done with stainless steel pivoting feet 1/4 turn.

– Contains 4 fixing insets for grilles or the maskings.

● Passage of the scialytic:

– Stainless steel sheet (10/10th) with white epoxy paint RAL 9010.

– Make an “airtight well” in the center of the plenum.

– Contains a “crystal tube” enabling to measure the clogging of the filters from the room manually.

– Easy access to the base of the scialytic due to 2 half slabs, airtight and removable.

● Filters “very high efficiency”:

– Filtering cells, standerd size: 3.6 – 9.6 and 12.6.

– Efficiency: H14 or U15

● Diffusion grilles:

– Stainless steel sheet (performation rate: 40%) with white epoxy rate RAL 9010.

– Ensures a regular air diffusion, withour stopping o dead zone.

Phòng mổ TL - PM 08

Danh mục sản phẩm